Sycos continues to expand it’s PMC product line with the introduction of an Arinc-629
interface that offers a transmitter and full bus monitor in a single width PMC. The
design is based upon a well established product from Sycos’ VMEbus cards, with XPP,
RPP and switchable data buffers implemented in embedded SRAM and 16 dedicated SRAM
Cyclic Buffers for 32-bit data loads from/to PCI bus implemented in 256Kbytes of
Arinc-629 connection, +/-15v supply and Pseudo Bus connection are through LEMO connectors
on the front panel. Other I/Os are routed to the PMC I/O connector.
The Sy629PMC-BP-M card can be installed on a Sycos PCI-PMC carrier card, or on a
VME-64 PMC caddy to give two Arinc-629 bus connections.
The Sy629PMC-M-CMC card provides the equivalent of one Arinc-629 bus with 5 stub
cable connections. The card requires no configuration. Although the card is mechanically
compliant to PMC, it does not communicate with PCI bus but simply exploits the power
supplies provided on the PMC connectors. Provision is made to cascade cards to extend
the number of stub cable connections to 10, 15, 20 etc. This card is particularly
effective in systems that support Boeing 777 full flight simulators, where multiple
buses and many stub cable connections are required.
Two further PMC products are in development:
fault generation and detection (firmware upgrade to Sy629PMC-BPM card)
Multi-Terminal-Emulation. Up to 120 ARINC-629 Terminals in a single